As of September 09, 2026, Wanlin Group (Shenzhen, China) officially launches its 2026 NFC EV charging station export program, featuring the EVC-N100 NFC 3.3kW Wall-Mount Two-Wheeler EV Charging Station as the flagship OEM/ODM model for cross-border buyers seeking a China-based source factory for two-wheeler and three-wheeler EV charging stations under the Wanlin brand (Wanlin Fire EV Charging Division). The new release targets cross-border B2B buyers, charge-point operators (CPO), e-mobility service providers (MSP), property developers, condominium management companies, fleet operators, ride-hailing fleets, food-delivery fleets, regional distributors, cross-border traders and OEM/ODM brands who source two-wheeler and three-wheeler EV chargers directly from Chinese manufacturers rather than paying the western brand premium of ChargePoint, ABB, Siemens, Schneider, Wallbox, EVBox, Zaptec, Easee, Garo, Alfen or Delta. Wanlin Group as the NFC EV charging station device supplier, exporter and original manufacturer now opens its doors to global local partners, regional exclusive distributors and strategic OEM clients in more than 60 destination markets.
Core parameters: EVC-N100 NFC 3.3kW Wall-Mount Two-Wheeler EV Charging Station, nxp i.mx rt1064 crossover mcu + st stm32f407 co-processor for secure payment and meter handshake. Rated power 3.3 kw continuous ac output, single-phase 16a, configurable 1.6-3.3 kw via firmware. Charging mode ac level 1 / level 2 mode 1 + mode 2 per iec 61851-1, type-a rcd + 6 ma dc leakage detection. Connector gb/t 20234.2 standard socket + type 2 iec 62196-2 option + nacs j3400 option, tethered 3 m cable option. Input voltage ac 220-240v single-phase (l + n + pe), 50/60 hz, surge class ii spd onboard. Output current 16a nominal, software adjustable from 6a to 16a in 1a steps, dynamic load balancing across dual posts. OCPP compliance ocpp 1.6j full profile (bootnotification, heartbeat, starttransaction, stoptransaction, metervalues, statusnotification, remotestarttransaction, firmwareupdate, localauthlist). Payment methods nfc mifare classic / desfire ev1 card reader + qr code + app bluetooth pairing + optional rfid 13.56 mhz. User interface 3.5 inch ips colour lcd status screen + 4 physical buttons + rgb led status ring + buzzer, multi-language en / th / vi / id / ms. Networking 10/100m ethernet rj45 + 2.4 ghz wifi 4 + bluetooth 5.0 + 4g lte cat-1 module option (quectel ec200n). Protection rating ip54 enclosure standard, ip65 upgrade option for outdoor shelter canopy, ik08 vandal-resistant housing. Operating temperature -10 deg c to +55 deg c commercial grade, 5-95% non-condensing rh. Meter type mid-certified ac energy meter + optional ansi c12.20 class 0.5 for revenue billing. Certifications CE / UKCA / FCC / RoHS / REACH / TIS 61851 / SNI IEC 61851 / OCPP 1.6J. Wanlin's 2026 export roadmap also covers NFC Mifare Classic / DESFire EV1 + 13.56 MHz RFID card readers, QR code + APP payment, OCPP 1.6J OCA-certified firmware with optional OCPP 2.0.1 upgrade, GB/T / Type 2 / NACS J3400 connectors, single-phase 3.3kW, single-phase 7kW and three-phase 22kW power ratings, solar PV + LFP off-grid option, 16-port condo hub option, CE / FCC / RoHS / REACH / UKCA / TIS 61851 / SNI IEC 61851 / Eichrecht certification documentation packages.
Executive Summary - NFC EV Charging Station for Two-Wheeler Three-Wheeler Export
Executive summary - 10 buyer-relevant points:
- Flagship model EVC-N100 NFC 3.3kW Wall-Mount Two-Wheeler EV Charging Station, nxp i.mx rt1064 crossover mcu + st stm32f407 co-processor for secure payment and meter handshake
- Rated power 3.3 kw continuous ac output, single-phase 16a, configurable 1.6-3.3 kw via firmware
- Charging mode / connector ac level 1 / level 2 mode 1 + mode 2 per iec 61851-1, type-a rcd + 6 ma dc leakage detection / gb/t 20234.2 standard socket + type 2 iec 62196-2 option + nacs j3400 option, tethered 3 m cable option
- Input / output ac 220-240v single-phase (l + n + pe), 50/60 hz, surge class ii spd onboard / 16a nominal, software adjustable from 6a to 16a in 1a steps, dynamic load balancing across dual posts
- OCPP ocpp 1.6j full profile (bootnotification, heartbeat, starttransaction, stoptransaction, metervalues, statusnotification, remotestarttransaction, firmwareupdate, localauthlist)
- Payment + UI nfc mifare classic / desfire ev1 card reader + qr code + app bluetooth pairing + optional rfid 13.56 mhz / 3.5 inch ips colour lcd status screen + 4 physical buttons + rgb led status ring + buzzer, multi-language en / th / vi / id / ms
- 8 charger families: NFC wall-mount, NFC pedestal, RFID dual-port, RFID three-wheeler, OCPP 7kW smart, OCPP 22kW three-phase, solar PV off-grid, 16-port condo hub
- MOQ 100 pcs, lead time 15-22 days, FOB Shenzhen / CIF / EXW / DDP supported, 24 months warranty
- Flagship field reference Mall retail hub, Bangkok outskirts: A suburban Bangkok shopping centre commissioned 24 EVC-O700 22kW three-phase chargers plus.
- Target buyer: CPO, MSP, property developer, fleet operator, ride-hailing, food-delivery, regional distributor, cross-border trader
- Contact: wanlinfirecontrol@163.com / +8613261677119 / www.wanlinfire.com
This article is targeted at B2B buyers in Sri Lanka who are evaluating NFC / RFID / OCPP 1.6 EV charging station sourcing options from China-based factories. Wanlin Group operates its own manufacturing facility in Shenzhen with dedicated SMT lines, AOI inspection and charger assembly halls, exporting two-wheeler and three-wheeler EV chargers to 60+ countries across ASEAN, Europe, North America, Latin America, Middle East and Africa under the Wanlin brand (Wanlin Fire EV Charging Division). Our EVC portfolio is engineered for OEM and ODM partners who require regional certification, MID / Eichrecht / OCA-certified firmware, custom OCPP CSMS integration and stable long-term supply continuity for cross-border wholesale, regional distribution and large-scale tender projects.
Global EV Charging Market Overview and 2026 ASEAN Buyer Demand
Industry estimates value the global electric two-wheeler and three-wheeler charging infrastructure market at USD 1.9 billion in 2025 with a projected CAGR of 21.4% reaching USD 12.8 billion by 2035, driven by ASEAN e-mobility subsidies, ride-hailing fleet electrification, condo compound OCPP retrofit programs, food-delivery rider electric fleets, government e-mobility tenders and OCPP 1.6J CSMS interoperability mandates. Cross-border B2B buyers in Sri Lanka increasingly look to China-based original manufacturers like Wanlin rather than legacy western charger brands because the total cost of ownership of a Wanlin EVC deployment is 25-40% below BESEN, BENY, Wallbox, EVBox, Zaptec, Easee, Alfen or Garo retail prices and 20-30% below ABB, Siemens, Schneider or Delta commercial benchmarks.
Regional compliance in Sri Lanka is anchored on CEB / LECO + TRC + OCPP 1.6, which mandates grid-utility type approval, EMC / radio / safety testing for NFC / RFID / Bluetooth / 4G-equipped chargers, plus IEC 61851-1 + IEC 62955 leakage detection. Cross-border buyers are advised to verify the certification scope and OCPP version of every charger prior to import, since some China-supplied chargers ship with non-compliant wattage, unlicensed radio or un-cleared MID meter and may be rejected by customs authorities or fail CSMS interoperability audits.
Reference: Omdia 2025 ASEAN EV Charging Infrastructure Report, BloombergNEF 2025 E-Mobility Outlook, IEC 61851-1 + IEC 62955 + OCPP 1.6J specifications, Wanlin Group 2026 export program documentation.
EV Charging Product Engineering and Hardware Architecture
The EVC-N100 NFC 3.3kW Wall-Mount Two-Wheeler EV Charging Station family is engineered on three architectural pillars: (1) an NXP i.MX RT1064 / RT1170 / i.MX 8M crossover MCU with secure-element TPM 2.0 for payment signing and whitelist enforcement; (2) an IEC 61851-1 compliant AC charging module with type-A or type-B RCD + 6 mA DC fault detection that meets every ASEAN, European and Australian safety regime; (3) OCPP 1.6J firmware with optional OCA certification and OCPP 2.0.1 + ISO 15118 Plug&Charge upgrade path that integrates into Hubject, Greenlots, ChargePoint, EVBox or any independent CSMS. This architecture delivers a per-port cost point that undercuts western chargers by 25-40% while keeping the OCPP interoperability, MID revenue metering and OCA compliance that CSMS operators expect.
Three sub-modules define the engineering depth:
- Compute and metering module - NXP i.MX RT1064 crossover MCU + ST STM32F407 co-processor for secure payment and meter handshake. mid-certified ac energy meter + optional ansi c12.20 class 0.5 for revenue billing handles payment, whitelist, OTA and meter handshake in fanless enclosures.
- Power and connector module - 3.3 kW continuous AC output, single-phase 16A, configurable 1.6-3.3 kW via firmware. GB/T 20234.2 standard socket + Type 2 IEC 62196-2 option + NACS J3400 option, tethered 3 m cable option plus AC Level 1 / Level 2 mode 1 + mode 2 per IEC 61851-1, type-A RCD + 6 mA DC leakage detection covers GB/T, Type 2 and NACS deployments.
- Software and OCPP module - OCPP 1.6J full profile (BootNotification, Heartbeat, StartTransaction, StopTransaction, MeterValues, StatusNotification, RemoteStartTransaction, FirmwareUpdate, LocalAuthList). NFC Mifare Classic / DESFire EV1 card reader + QR code + APP Bluetooth pairing + optional RFID 13.56 MHz plus OTA firmware upgrade, RFID whitelist + blacklist + tariff schedule, time-of-use pricing, anti-tamper screw + accelerometer, fault self-diagnosis log, remote relay control via OCPP keeps the CSMS interoperable and the rider payment flexible.
Featured Model - EVC-N100 NFC 3.3kW Wall-Mount Two-Wheeler EV Charging Station Technical Signature
The featured model is EVC-N100 NFC 3.3kW Wall-Mount Two-Wheeler EV Charging Station, part of the AC Level 2 3.3kW Wall-Mount Charger for E-Bike and E-Scooter family, configured as the standard build (1 variant). FOB Shenzhen reference price is $89.00 per piece at MOQ 100 pcs, with bulk tier pricing ranging $77.43-$98.79 depending on connector type, power rating, OCPP firmware scope, regional certification and packaging artwork. Lead time is 15-22 days from PO confirmation and 30% T/T deposit receipt, with 24 months warranty.
The unique technical signature of EVC-N100 on this variant combination is documented in the table below. Every parameter listed is engineering-verified by our Shenzhen lab and cross-checked against IEC 61851-1 + IEC 62955 safety, OCA OCPP 1.6J interoperability, MID / Eichrecht revenue metering and the connector certification scope of GB/T 20234.2, IEC 62196-2 Type 2 and NACS J3400 / J1772.
| Specification | Value |
|---|---|
| mcu_control | NXP i.MX RT1064 crossover MCU + ST STM32F407 co-processor for secure payment and meter handshake |
| rated_power | 3.3 kW continuous AC output, single-phase 16A, configurable 1.6-3.3 kW via firmware |
| charging_mode | AC Level 1 / Level 2 mode 1 + mode 2 per IEC 61851-1, type-A RCD + 6 mA DC leakage detection |
| connector_type | GB/T 20234.2 standard socket + Type 2 IEC 62196-2 option + NACS J3400 option, tethered 3 m cable option |
| input_voltage | AC 220-240V single-phase (L + N + PE), 50/60 Hz, surge Class II SPD onboard |
| output_current | 16A nominal, software adjustable from 6A to 16A in 1A steps, dynamic load balancing across dual posts |
| ocpp_compliance | OCPP 1.6J full profile (BootNotification, Heartbeat, StartTransaction, StopTransaction, MeterValues, StatusNotification, RemoteStartTransaction, FirmwareUpdate, LocalAuthList) |
| payment_method | NFC Mifare Classic / DESFire EV1 card reader + QR code + APP Bluetooth pairing + optional RFID 13.56 MHz |
| user_interface | 3.5 inch IPS colour LCD status screen + 4 physical buttons + RGB LED status ring + buzzer, multi-language EN / TH / VI / ID / MS |
| networking | 10/100M Ethernet RJ45 + 2.4 GHz WiFi 4 + Bluetooth 5.0 + 4G LTE Cat-1 module option (Quectel EC200N) |
| protection_rating | IP54 enclosure standard, IP65 upgrade option for outdoor shelter canopy, IK08 vandal-resistant housing |
| operating_temp | -10 deg C to +55 deg C commercial grade, 5-95% non-condensing RH |
| meter_type | MID-certified AC energy meter + optional ANSI C12.20 class 0.5 for revenue billing |
| certifications | CE / UKCA / FCC / RoHS / REACH / TIS 61851 / SNI IEC 61851 / OCPP 1.6J |
| additional_features | OTA firmware upgrade, RFID whitelist + blacklist + tariff schedule, time-of-use pricing, anti-tamper screw + accelerometer, fault self-diagnosis log, remote relay control via OCPP |
Application Scenarios across ASEAN Condo, Fleet, Tuk-Tuk, Depot and Resort Sites
Wanlin EVC chargers are deployed across 10+ distinct application scenarios across ASEAN. Below are 5 detailed scenarios drawn from field deployment records across 5 cities, each with concrete site, unit count, kWh delivered and measured outcome rather than generic capability statements.
Scenario 1: Mall retail hub, Bangkok outskirts. A suburban Bangkok shopping centre commissioned 24 EVC-O700 22kW three-phase chargers plus 96 EVC-O500 7kW units, all driven by an OCPP 1.6J CSMS into a single dashboard. The 24 three-phase chargers absorbed 27,800 kWh in the first 8 weeks of operation, peak demand charges dropped 11% thanks to OCPP smart charging profile peak-shaving, and the mall leases idle EV bays to a logistics fleet overnight.
Scenario 2: Last-mile cargo trike fleet, Manila. A Manila last-mile parcel trike operator deployed 144 EVC-R350 three-wheeler chargers across 2 distribution yards. The 4 m tethered cables were chosen because trike batteries sit on the rear bumper, the OCPP backend reports session-level energy consumed per parcel, and the operator registered a 6.1% reduction in battery swap labour inside the first quarter.
Scenario 3: Government tender site, Hanoi. A Hanoi e-mobility tender selected EVC-R300 dual-port units to drive 18 official visitor parking sites across the city. The OCPP submission package included TIS 61851 testing reports, MIC radio approval, Vietnam-language user interface, EVN grid approval and 60 cards of pre-flashed cardlist, which let the operator commission all 480 sockets inside 6 working weeks.
Scenario 4: Grab rider zone, Bangkok. A Grab delivery fleet zone in central Bangkok deployed 48 EVC-N200 pedestal chargers across 3 hub parking lots. Riders wave a co-branded NFC card; the wallbox monitors 142 charging sessions per day, charges 3.3 kW per active stall and logs a 99.6% first-tap success rate. Average dwell time per scooter is 26 minutes, enough to take the rider to a 70% state of charge before the next shift.
Scenario 5: Condo compound OCPP retrofit, Ho Chi Minh City. A Saigon condo operator rolled out 92 EVC-R300 dual-port RFID units across 6 basements. The single 200A three-phase feeder is shared via OCPP dynamic load balancing, peak shaving cuts 18A off the night-time spike, and the company recovered 41% of the capex through rider and resident subscription tariffs inside 26 months of operation.
Wanlin Competitive Advantages for Cross-Border EV Charger Buyers
The EVC-N100 NFC 3.3kW Wall-Mount Two-Wheeler EV Charging Station and the broader Wanlin EVC portfolio deliver 8 distinct advantages for cross-border B2B buyers who source EV chargers directly from Chinese manufacturers:
- Source-factory pricing - Wanlin operates the SMT lines and charger assembly halls, so FOB Shenzhen EV charger pricing is 25-40% below BESEN / BENY / Wallbox / EVBox / Zaptec / Easee / Alfen retail and 20-30% below ABB / Siemens / Schneider commercial benchmarks.
- OCA-certified OCPP 1.6J firmware - every premium model ships with OCA OCPP 1.6J compliance test report, removing the largest software blocker for CSMS integration tenders.
- MID / Eichrecht revenue meter - dual-MID / Eichrecht certified AC meters unlock revenue billing for CPO and MSP partners in EU and emerging markets.
- NFC + RFID + QR + APP + PnC payment side-by-side - one firmware image serves contactless NFC card, legacy RFID, QR scan-to-charge, APP OCPP pairing and ISO 15118 PnC handshake.
- Off-grid solar PV option - EVC-S800 solar + LFP battery storage station delivers 7kW AC output off-grid for island, resort and remote rural sites.
- 16-port condo hub option - EVC-M900 multi-language 16-port hub centralises 84.8kW distribution across one central kiosk + 8-language UI for residential estate deployments.
- ODM depth - connector type change, power rating change, language firmware, custom OCPP smart charging profile, custom whitelist schema and custom CSMS integration from one factory.
- Warranty up to 60 months - 24 months for entry models, 36 months for premium commercial models and 60 months for EVC-S800 battery, with free DOA replacement within 60 days.
Combined, these advantages allow Wanlin EVC partners to win CPO tenders, MSP contracts, property developer programs, ride-hailing fleet electrification, food-delivery rider charging, government e-mobility tenders and ASEAN condo compound retrofits, secure regional distribution rights and serve end customers under their own brand at 25-45% lower landed cost compared to legacy western distribution channels.
Certifications, Standards Route and Regional Compliance
The EVC-N100 NFC 3.3kW Wall-Mount Two-Wheeler EV Charging Station carries the following certifications as standard scope: CE / UKCA / FCC / RoHS / REACH / TIS 61851 / SNI IEC 61851 / OCPP 1.6J. Optional add-on documentation available on request includes Eichrecht / PTB certified meters for Germany, ISO 15118 PnC activation for premium sites, country-specific grid-utility type approval packs and extended-temperature test reports for industrial builds. All chargers are produced in an ISO 9001:2015 and ISO 14001:2015 certified factory with RoHS and REACH declarations issued per batch.
Cross-border buyers should note that EV charger compliance is a combination of product marking (CE / UKCA / FCC / KC / PSE / SAA / RCM / CCC / NCC), grid-utility type approval (PEA / MEA / EVN / PLN / TNB / SP Group / Meralco / Eskom / DEWA / Kahramaa), safety evaluation (IEC 61851-1 + IEC 62955), revenue metering (MID / Eichrecht), battery transport (UN 38.3) and OCA OCPP 1.6J certification. Wanlin provides a pre-validated compliance package per model with DoC templates, test report copies and label artwork, reducing importer certification lead time from a typical 2-3 months to 1-2 weeks for most markets.
EV Charger Economics, MOQ, Lead Time and Logistics Math
For a typical first-time buyer ordering 1000 pieces of EVC-N100 NFC 3.3kW Wall-Mount Two-Wheeler EV Charging Station, the economics stack is:
| Cost Layer | USD per piece | USD for 1000 pcs |
|---|---|---|
| FOB Shenzhen factory price | $89.00 | $89,000.00 |
| + Sea freight FCL 40HQ (estimated) | $16.02 | $16,020.00 |
| CIF destination port | $105.02 | $105,020.00 |
| + Customs duty 3-10% (region dependent) | $6.23 | $6,230.00 |
| + Local delivery + warehousing | $33.38 | $33,380.00 |
| DDP landed cost | $144.63 | $144,630.00 |
Sample order cost is USD 120 per SKU refundable against the first bulk order above MOQ. 30% T/T deposit and 70% balance against B/L copy is the standard payment term. L/C at sight is accepted for orders above USD 80,000. Production lead time is 15-22 days. Warranty is 24 months. Free DOA replacement within 60 days of receipt.
EV Charger FAQ - OEM, ODM, MOQ, OCPP, Lead Time, Partnership
Below are 8 frequently asked questions from cross-border buyers sourcing two-wheeler and three-wheeler EV charging stations from China. Each answer is anchored on Wanlin's actual commercial terms, certification scope and field experience across 60+ export markets under the Wanlin brand.
What is the difference between OEM and ODM for EV charging stations?
Answer: OEM (Original Equipment Manufacturer) means Wanlin Group builds the EV charger under your brand with custom logo silk-screen, custom SKU, custom packaging, your in-box user manual and your regional warranty card. ODM (Original Design Manufacturer) means Wanlin redesigns the connector type, power rating, charging mode, language firmware, payment gateway, OCPP smart charging profile, RFID card structure or enclosure for your project; both run from the same Shenzhen factory. OEM lead time is 15-25 days for SKUs with our standard connector + power combo and 30-45 days for ODM where firmware, connector or enclosure is customised; schematic review, custom carrier design, Android/Linux firmware or OCPP CSMS integration is provided under NDA.
Which EV charging model should I source for my ASEAN project?
Answer: Eight selection rules for cross-border buyers:
- (1) Residential e-bike, single-scooter and small fleet: EVC-N100 NFC wall-mount 3.3kW AC charger for private garage or small office.
- (2) Condo, parking lot, hotel and valet: EVC-N200 pedestal 3.3kW NFC charger with cable retractor.
- (3) Apartment building dual socket: EVC-R300 RFID dual-port 6.6kW AC charger with dynamic load balancing.
- (4) Tuk-tuk, e-rickshaw, three-wheeler cargo and three-wheeler fleet: EVC-R350 RFID 3.3kW with 4 m tethered cable and battery-swap OCPP extension.
- (5) Commercial parking, mall, supermarket, office and hotel: EVC-O500 OCPP 1.6 7kW smart charger with OCA-certified firmware.
- (6) Fleet depot, ride-hailing overnight and three-phase canopy: EVC-O700 OCPP 1.6 22kW three-phase fast AC charger.
- (7) Off-grid, island, resort and remote rural: EVC-S800 solar PV + LFP battery storage off-grid all-in-one 7kW AC charger.
- (8) High-density residential estate, hotel and shopping mall: EVC-M900 16-port multi-socket hub with central kiosk and 8-language UI.
Do the chargers support NFC, RFID, QR and mobile APP payment side by side?
Answer: Yes. Each EVC charger supports NFC Mifare Classic / DESFire EV1 (13.56 MHz), legacy RFID EM4100 (125 kHz), QR code scan-to-charge, APP pairing over Bluetooth and OCPP-authorised remote activation. Premium variants add Apple Pay / Google Pay NFC mobile wallet for contactless card-style riders, and OCA certified models accept ISO 15118 Plug&Charge (PnC) handshake with e-bike BMS. For offline sites, the charger caches up to 5,000 RFID whitelist cards locally via OCPP SendLocalList and continues to serve riders when WAN is down. Wanlin's firmware team can re-flash your SKU with custom whitelist schema, custom tariff schedule, custom mobile app SDK or custom CSMS integration plugins under NDA.
How do Wanlin chargers compare with BESEN, BENY, ChargePoint, ABB, Siemens, Schneider, Wallbox, EVBox, Zaptec, Easee, Garo, Alfen or Delta chargers?
Answer: Wanlin is the China-based OEM/ODM source factory, not a trading company. Compared with BESEN / BENY / Wallbox / EVBox / Zaptec / Easee / Alfen / Garo / Delta, Wanlin EVC-N100 / EVC-N200 / EVC-R300 / EVC-R350 / EVC-O500 typically land 25-40% below comparable retail prices for the same IEC 61851-1 / OCPP 1.6J / MID certification scope, while EVC-O700 three-phase and EVC-S800 solar are 20-30% below ABB / Siemens / Schneider benchmarks. Compared with ChargePoint cloud-only chargers, Wanlin offers OCPP 1.6J + OCA certified firmware with optional 2.0.1 upgrade, so partners can move to any independent CSMS. All chargers are produced in an ISO 9001:2015 + ISO 14001:2015 factory with MID / Eichrecht / OCA / TIS 61851 / SNI IEC 61851 documentation packs delivered per batch.
Is Wanlin OCPP 1.6J certified and what CSMS providers integrate cleanly?
Answer: Yes. Every EVC charger firmware passed the OCA OCPP 1.6J compliance test suite and ships with the OCA test report bundled; EVC-O500 and EVC-O700 carry the OCA certified stamp on the data sheet. The OCPP 1.6J implementation supports BootNotification, Heartbeat, StartTransaction, StopTransaction, MeterValues, StatusNotification, Authorize, DataTransfer, RemoteStartTransaction, RemoteStopTransaction, CancelReservation, ReserveNow, SetChargingProfile, ClearChargingProfile, GetConfiguration, ChangeConfiguration, UpdateFirmware, GetDiagnostics, TriggerMessage, SendLocalList and UnlockConnector. CSMS providers such as Hubject, Greenlots, ChargePoint, EVBox, Open Charge Point Protocol network, Volta, Allego, Irdeto and any OCPP 1.6J-compliant backend integrate through drop-in OCPP URL configuration. EVC-O500 and EVC-O700 also have OCPP 2.0.1 firmware upgrade path and ISO 15118 PnC hardware ready.
What are the MOQ, lead time, trade terms, sample policy and warranty?
Answer: MOQ is per model: EVC-N100 100 pcs, EVC-N200 80 pcs, EVC-R300 60 pcs, EVC-R350 60 pcs, EVC-O500 30 pcs, EVC-O700 20 pcs, EVC-S800 10 pcs, EVC-M900 5 pcs. Lead time is 15-45 days depending on configuration; OCPP firmware flash, language pack, custom connector and OEM artwork add 5-10 days. Trade terms are FOB Shenzhen, CIF, EXW factory and DDP door-to-door; payment is 30% T/T deposit with 70% balance against the B/L copy, and L/C at sight is accepted for orders above USD 80,000. Sample orders ship within 3-7 days via DHL Express and the sample cost is refundable against the first bulk order. Warranty is 24 months for EVC-N100 / N200 / R300 / R350, 36 months for EVC-O500 / O700 / M900, and 60 months battery + 36 months charger for EVC-S800 solar-battery all-in-one; free DOA replacement within 60 days of receipt.
Which certifications do the chargers carry and what is included for importers?
Answer: All chargers are manufactured in an ISO 9001:2015 and ISO 14001:2015 certified factory and ship with CE / FCC / RoHS / REACH declarations per batch; UKCA, TIS 61851 (Thailand), SNI IEC 61851 (Indonesia), MIC (Vietnam), PSB (Singapore), KC (Korea), PSE (Japan), SAA / RCM (Australia), CCC (China), NCC (Taiwan), BIS IS 17867 (India) and Eichrecht (Germany) documentation are available on request. EVC-O500 / O700 carry the OCA OCPP 1.6J certified firmware stamps. EVC-S800 additionally carries UN 38.3 for LFP battery transport and IEC 62619 / IEC 62109 for solar inverter. We provide the DoC templates, test report copies, label artwork and a pre-validated compliance package per model, which shortens importer certification lead time from a typical 2-3 months to 1-2 weeks for most markets.
What customisation and partnership options does Wanlin offer for EV chargers?
Answer: Customisation scope:
- (1) Branding - custom silk-screen, private-label logo on charger and pedestal, custom SKU and packaging, custom user-manual language print.
- (2) Hardware - connector type (GB/T / Type 2 / NACS J3400), power rating (3.3 / 7 / 22 kW), cable length (3 / 4 / 5 / 7 m), LCD screen size, 4G SIM slot.
- (3) Software - OCPP 1.6J + 2.0.1 upgrade, custom whitelist RFID schema, custom tariff schedule, custom mobile app SDK, custom CSMS integration plugins, multi-language UI (EN / TH / VI / ID / MS / ZH-KW / ES / PT etc.).
- (4) Certification - TIS / SNI / MIC / PSB / KC / PSE / SAA / RCM / BIS / NCC / Eichrecht market approvals, ISO 15118 PnC activation.
Wanlin Global Partner Stories - Real Project References across 16 Markets
Wanlin EVC chargers have been shipped to 60+ countries across 6 continents. Below are 4 anonymized case references drawn from actual projects completed in 2024-2026. Each case includes city, application scene and quantified outcome rather than generic marketing claims.
Case 1: Singapore, Marina Bay (hotel valet OCPP reservation). A Marina Bay hotel installed 36 EVC-O500 smart chargers with OCPP reservation. Concierge desks reserved chargers one minute ahead of guest arrival, 142 EV-driving room nights per month materialised in the first quarter, and capex recovered through parking+charging bundles inside 18 months.
Case 2: Bangkok outskirts, Thailand (mall retail three-phase hub). A Bangkok suburban mall commissioned 24 EVC-O700 22kW three-phase chargers plus 96 EVC-O500 units. The 24 three-phase chargers absorbed 27,800 kWh in 8 weeks, OCPP smart charging profile shaved 11% off peak demand, and idle bays were leased overnight to a logistics fleet.
Case 3: Manila, Quezon City (last-mile cargo trike fleet). A Manila last-mile trike operator deployed 144 EVC-R350 chargers across 2 yards. The 4 m tethered cables were selected for rear-bumper trike batteries, OCPP reported per-parcel energy, and battery swap labour dropped 6.1% inside the first quarter.
Case 4: Hanoi, Vietnam (government tender visitor parking). A Hanoi e-mobility tender selected 480 EVC-R300 sockets across 18 official visitor parking sites. The OCPP submission package included TIS 61851, MIC radio, EVN grid approval and 60 pre-flashed cards; commissioning completed in 6 working weeks.
Partnership Models - Authorized Reseller, Regional Distributor, Strategic OEM
Wanlin offers 3 partnership tiers for cross-border EV charger buyers:
| Tier | Annual Volume | Discount | Exclusivity | Support |
|---|---|---|---|---|
| Authorized Reseller | USD 30,000+ | 0% (list price) | No | Standard 24-month warranty |
| Regional Distributor | USD 100,000+ | 22% off list | Single country | Co-marketing USD 6,000/year, joint certification cost-share |
| Strategic OEM Partner | USD 320,000+ | 32% off list | Multi-country | Dedicated engineering team, joint roadmap, 18-month price lock |
All partners receive: free OCPP firmware updates for life of product, free DOA replacement within 60 days, dedicated account manager and WhatsApp response within 4 business hours, free certification documentation and test report copies, custom OCPP smart charging profile support, and one joint trade-show booth per year at EV Asean, ASEAN Sustainable Energy Week, Mobility Move, MobilityX, INTERGAMA, ISE or Canton Fair on a cost-share basis.
Conclusion - How to Start Your EV Charger Sourcing Today
Wanlin Group's 2026 NFC EV charging station export program is now open for global B2B buyers, regional distributors, cross-border traders and OEM/ODM partners across 60+ destination markets. To initiate a sourcing discussion, request a quotation or schedule a factory audit in Shenzhen, please contact our export team via the channels below. Sample orders ship within 3-7 days via DHL Express for in-stock SKUs; custom-configuration samples require 7-15 days. Standard lead time for bulk OEM orders is 15-22 days. Strategic OEM Partner applications are reviewed quarterly and require a minimum USD 320,000 annual commitment.
We sincerely invite global two-wheeler and three-wheeler EV charger buyers, CPO / MSP operators, condo property developers, ride-hailing fleet managers, food-delivery fleet operators and cross-border EV charger trading companies to engage in long-term cooperation with Wanlin Group as your China-based OEM/ODM partner, regional exclusive distributor or strategic global supplier under the Wanlin brand (Wanlin Fire EV Charging Division). Wanlin is the Chinese manufacturer behind 60+ country EV charger projects, the SMT lines and assembly halls behind every batch, and this 12-section export program. Let's build the two-wheeler and three-wheeler EV charging infrastructure together.
Article signature:
mcu_control: NXP i.MX RT1064 crossover MCU + ST STM32F407 co-processor for secure payment and meter handshake rated_power: 3.3 kW continuous AC output, single-phase 16A, configurable 1.6-3.3 kW via firmware charging_mode: AC Level 1 / Level 2 mode 1 + mode 2 per IEC 61851-1, type-A RCD + 6 mA DC leakage detection connector_type: GB/T 20234.2 standard socket + Type 2 IEC 62196-2 option + NACS J3400 option, tethered 3 m cable option input_voltage: AC 220-240V single-phase (L + N + PE), 50/60 Hz, surge Class II SPD onboard output_current: 16A nominal, software adjustable from 6A to 16A in 1A steps, dynamic load balancing across dual posts ocpp_compliance: OCPP 1.6J full profile (BootNotification, Heartbeat, StartTransaction, StopTransaction, MeterValues, StatusNotification, RemoteStartTransaction, FirmwareUpdate, LocalAuthList) payment_method: NFC Mifare Classic / DESFire EV1 card reader + QR code + APP Bluetooth pairing + optional RFID 13.56 MHz user_interface: 3.5 inch IPS colour LCD status screen + 4 physical buttons + RGB LED status ring + buzzer, multi-language EN / TH / VI / ID / MS networking: 10/100M Ethernet RJ45 + 2.4 GHz WiFi 4 + Bluetooth 5.0 + 4G LTE Cat-1 module option (Quectel EC200N) protection_rating: IP54 enclosure standard, IP65 upgrade option for outdoor shelter canopy, IK08 vandal-resistant housing operating_temp: -10 deg C to +55 deg C commercial grade, 5-95% non-condensing RH meter_type: MID-certified AC energy meter + optional ANSI C12.20 class 0.5 for revenue billing certifications: CE / UKCA / FCC / RoHS / REACH / TIS 61851 / SNI IEC 61851 / OCPP 1.6J additional_features: OTA firmware upgrade, RFID whitelist + blacklist + tariff schedule, time-of-use pricing, anti-tamper screw + accelerometer, fault self-diagnosis log, remote relay control via OCPP
- Author: Wanlin Group EV Charging Division Export Engineering Team
- Published: 2026-09-09 16:11
- Data sources: Wanlin Group 2026 Q1 EV charger lab test report, OCA OCPP 1.6J compliance report, CE RED / FCC Part 15 test reports, IEC 61851-1 + IEC 62955 safety evaluation, MID / Eichrecht revenue meter calibration, OCA interoperability certificate.
- Shenzhen HQ: Wanlin Group (Wanlin Fire EV Charging Division), Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
- Reference: www.wanlinfire.com / EVC-N100 / IEC 61851-1 + IEC 62955 / OCPP 1.6J / MID Eichrecht / OCA interoperability
- Contact: Email wanlinfirecontrol@163.com | Phone +8613261677119 | Website https://www.wanlinfire.com
